SMOK MORPH POD-40 Kit Review
An ergonomic pod mod featuring a 2000 mAh built-in battery, 5–40W adjustable power, 3.7 ml pod capacity, and broad RPM coil compatibility.
The SMOK MORPH POD-40 is a compact pod mod model that combines the portability of traditional pod devices with a display, wattage adjustment, and a replaceable coil system. Featuring a 2000 mAh built-in battery and an output power ranging from 5 to 40W, the device supports various SMOK RPM coil options.
The curved, soft-touch grip surface on the back of the MORPH POD-40 allows the device to sit more comfortably in the palm of your hand. Meanwhile, the large firing bar helps operate the device easily across different grip styles.
SMOK MORPH POD-40 Key Features
Ergonomic Design and Firing Bar
The curved body and leather-feel rear grip of the MORPH POD-40 are engineered to fit naturally into your palm. The large firing bar on the front allows you to trigger the device from a broader surface area rather than pressing a single small button.
Measuring approximately 108.35 × 37.2 × 28.35 mm, the device is slightly thicker than traditional slim pods, but remains highly portable considering its 2000 mAh battery capacity and replaceable coil system.
0.91-inch OLED Display
Located on the side of the device, the 0.91-inch black-and-white OLED screen displays all essential operating information. Screen rotation support makes it easy to read whether you hold the device in your left or right hand.
- Selected wattage level
- Installed coil resistance
- Battery level indicator
- Puff duration
- Total puff counter
MORPH POD-40 Pod System
The standard MORPH POD-40 cartridge features a 3.7 ml e-liquid capacity. In compliance with TPD regulations, regional packages may feature a reduced 2 ml capacity.
Instead of integrated fixed coils, the pod uses a replaceable SMOK RPM coil system. This means when the coil reaches the end of its lifespan, you only need to replace the coil itself rather than the entire pod.
| Pod Feature | Description |
|---|---|
| Standard Capacity | 3.7 ml |
| TPD Capacity | 2 ml |
| Filling System | Rubber-stoppered exterior fill port |
| Coil Connection | Press-fit bottom installation |
| Coil Family | SMOK RPM coil series |
| Pod Connection | Magnetic and clip-assisted connection |
How to Fill the Pod
- Lock the fire button or turn off the device.
- Carefully open the rubber fill plug on the pod.
- Insert the tip of your e-liquid bottle into the filling slot.
- Leave a small air pocket inside the pod.
- Firmly close the rubber stopper.
- If installing a new coil, wait 5–10 minutes before first use to prime.
Included RPM Coils
RPM Mesh 0.4Ω Coil
Featuring a mesh heating surface, the recommended power setting for this coil is approximately 25W. Ideal for an open, vapor-focused draw.
RPM Triple 0.6Ω Coil
Constructed with a triple coil structure, the recommended wattage for this 0.6Ω RPM coil is around 25W, designed for balanced flavor and vapor production.
Benefits of RPM Coil Compatibility
Compatibility with the RPM coil series allows the MORPH POD-40 to support a wide range of resistances and vaping styles. However, different RPM coils require different wattage levels and e-liquid formulations.
Higher resistance RPM MTL coils operate best at lower wattage with a tighter draw, while lower resistance mesh options demand wider airflow and higher power settings.
| RPM Coil | Recommended Power | Usage Style |
|---|---|---|
| RPM Mesh 0.4Ω | 25W | Airier draw and enhanced vapor |
| RPM Triple 0.6Ω | 25W | Balanced flavor and vapor density |
| RPM MTL Mesh 0.3Ω | 10–15W | Tighter mouth-to-lung (MTL) draw |
| RPM DC MTL 0.8Ω | Approx. 16W | Low-power MTL vaping |
| RPM SC 1.0Ω | Approx. 14W | Mellow draw with low e-liquid consumption |
Coil options and recommended wattage values should be verified against your specific product version. Always prioritize the wattage range printed on the coil body or packaging.
Adjustable Airflow
The airflow adjustment slider on the MORPH POD-40 controls the amount of air entering the pod. When using higher-resistance MTL coils, the airflow inlet can be closed down for a restricted draw; for lower-resistance coils, an open setting provides smoother airflow.
Coil resistance, wattage, and airflow configuration must be balanced properly. Restricting airflow excessively can overheat the coil, while opening it too wide may mute flavor intensity.
SMOK MORPH POD-40 Technical Specifications
| Technical Spec | Value |
|---|---|
| Dimensions | 108.35 × 37.2 × 28.35 mm |
| Weight | Approx. 119.5 g |
| Battery Capacity | 2000 mAh internal battery |
| Output Power | 5–40W |
| Display | 0.91-inch OLED |
| Standby Current | <120µA |
| Input Voltage | 3.3–4.2V |
| Output Voltage | 0.5–4.0V |
| Resistance Range | 0.3–2.5Ω |
| Charging Port | USB Type-C |
| Max Charging Current | 1.4A |
Safety Protections
- 8-second continuous firing cut-off
- Low voltage warning
- Short circuit protection
- High-temperature protection
- Intelligent coil recognition
- Internal lithium battery protection
SMOK MORPH POD-40 Kit Includes
- 1 × SMOK MORPH POD-40 Device (2000 mAh)
- 1 × MORPH POD-40 Empty RPM Pod (3.7 ml)
- 1 × RPM Mesh 0.4Ω Coil
- 1 × RPM Triple 0.6Ω Coil
- 1 × USB Type-C Charging Cable
- 1 × User Manual
Pod capacity and box contents may vary based on market region. TPD packages feature a 2 ml pod instead of the standard 3.7 ml version.
Pros and Considerations
Key Advantages
- 2000 mAh built-in battery
- 5–40W adjustable power
- Broad RPM coil compatibility
- Adjustable airflow control
- Rotatable OLED screen
- Ergonomic grip design
Things to Consider
- Internal battery cannot be replaced
- Each RPM coil requires specific wattage
- Improper coil seating can cause leaks
- Bulkier form factor than ultra-slim pods
- Monochrome OLED rather than color screen
- Condensation can build up under the pod
Who Is the MORPH POD-40 Best For?
The SMOK MORPH POD-40 is a great fit for adult vapers looking for more customizability than a basic pod system offers, without the bulk and hassle of an external-battery box mod.
Thanks to extensive RPM coil support, users can easily dial in everything from a tight mouth-to-lung (MTL) draw to a restricted direct-lung (RDL) vape depending on their preferred coil, wattage, airflow, and e-liquid combination.
Explore suitable options for your setup in our e-liquid collection.
Compare Different Pod Mod Options
Discover the latest pod mod models from SMOK, Vaporesso, Uwell, VOOPOO, and more in one place.
View All Pod Mod ModelsSMOK – Coil & Pod Compatibility Guide
SMOK – MORPH POD-40 User Manual
