VOOPOO Coil is the general name for the replaceable coil families used in VOOPOO brand electronic cigarettes, pods, Pod Mods, and atomizer systems. The VOOPOO product range features different coil platforms, from low-power MTL use to DTL systems capable of reaching 80–100W levels.
In current VOOPOO products, the PnP X Coil platform stands out, while the previous generation PnP Coil, high-power TPP Coil, and low-power MTL/RDL-focused ITO Coil systems are also used in various devices.
When choosing a VOOPOO coil, it is not enough to look only at resistance values such as 0.15Ω, 0.3Ω, 0.6Ω, or 0.8Ω. First, the coil family supported by the device, cartridge, or tank being used must be determined, followed by the resistance and the wattage range specified by the manufacturer.
The shortest answer to the question "What is a VOOPOO coil?" is that it is a replaceable consumable part that heats the e-liquid inside a compatible pod or tank.
A ready-to-use VOOPOO coil generally contains;
when the device is activated, the coil heats up, and the e-liquid carried by the cotton creates an aerosol.
You can browse the Electronic Cigarette Coil category for different brand and model options.
The PnP X Coil is one of the main replaceable coil platforms used in VOOPOO's current Pod Mod and tank systems.
The PnP X family offers a very wide resistance range from MTL to high-power DTL use.
PnP X is not just a DTL or just an MTL coil platform.
The usage characteristic should be evaluated together with the airflow of the PnP X cartridge or tank being used.
The PnP X 0.15Ω coil is a high-power DTL option used in the 60–80W operating range.
It can be used in UFORCE-X and compatible high-power PnP X systems.
The PnP X 0.2Ω coil is a DTL option used in the 40–60W operating range.
The PnP X 0.3Ω coil has a 32–40W operating range.
VOOPOO positions this coil in the DTL and RDL usage class.
The PnP X 0.45Ω coil is an RDL coil option operating in the 25–32W range.
The PnP X 0.6Ω coil is an MTL/RDL option operating in the 18–23W range.
The PnP X 0.8Ω coil is an MTL coil option used in the 12–16W power range.
The PnP X 1.0Ω coil is one of the tight MTL options used in the 10–13W operating range.
The PnP X platform is used in many of VOOPOO's current DRAG and Pod Mod products.
Examples of compatible systems include;
products that use the PnP X platform can be cited.
However, due to the maximum power of the device and the type of cartridge used, not all PnP X resistances may be used in the same way on every device.
There are different cartridges in the PnP X family designed for different airflow and usage styles.
Designed for DTL/RDL use with more open airflow.
Designed for tighter airflow and MTL/RDL use.
In VOOPOO's official compatibility information, 0.3Ω and 0.6Ω options are specifically mentioned for the PnP X MTL cartridge.
A generalization like "PnP X Coil is definitely used in every PnP X cartridge" should not be made. The DTL or MTL version of the cartridge and the maximum power of the device must be checked.
The UFORCE-X Tank uses the PnP X Coil platform.
Models like the UFORCE-X and the current UFORCE-X Tank II offer broad compatibility by supporting all PnP X coil resistances.
Low-resistance 0.15Ω and 0.2Ω PnP X options are commonly used in standard packages.
VOOPOO states that for the PnP X platform, up to 100ml of e-liquid usage can be achieved with a single coil under laboratory conditions.
However, this value does not necessarily mean the exact coil life for every user.
Actual usage duration can be changed by;
The PnP Coil is the extensive coil platform developed before PnP X and used in VINCI, DRAG S/X, and various older Pod Mod models.
The PnP family includes VM, TW, DW, TM, R, and different coil series.
Newer TW Series coil options have also been developed for the PnP platform.
These coils belong to the old PnP platform and are not the same product as the PnP X Coil.
No.
The old platform used in VINCI, older DRAG Pod Mods, and previous PnP tank/cartridge systems.
A different physical coil platform used in new-generation DRAG and UFORCE-X systems.
Although PnP and PnP X names are similar, coil connections are different and they are not directly interchangeable.
No.
For example;
even if their resistances are similar, they are different coil models and platforms.
The same ohm value does not mean the same coil. The product code and coil family must be checked.
The TPP Coil is a separate coil platform developed by VOOPOO for high-power DTL tank and Pod Mod systems.
No. Even though both have a 0.15Ω resistance value, their wattage ranges are different.
60–80W
80–100W
This is one of the good examples showing that coil wattage cannot be determined by looking only at the ohm value.
No.
TPP and PnP are different physical coil platforms.
If a tank or cartridge is specifically designed for TPP Coil, PnP or PnP X Coil should not be directly installed in its place.
The TPP platform is an older high-power VOOPOO coil system than PnP X.
Although PnP X is more prominent in new DRAG and UFORCE-X products today, TPP Coil continues to be an important spare part platform for users of old TPP tanks and compatible devices.
The ITO Coil is a mesh coil platform used in VOOPOO's low and medium-power MTL/RDL devices.
There are four basic resistance options in the ITO family.
The ITO-M0 0.5Ω Mesh Coil is an RDL coil option used in the 18–25W operating range.
The ITO-M1 0.7Ω Mesh Coil is used in the 14–18W operating range.
It is one of the options in the ITO family positioned between MTL and more open draws.
The ITO-M2 1.0Ω Mesh Coil is an MTL coil option used in the 10–14W range.
The ITO-M3 1.2Ω Mesh Coil is a tight MTL coil option used in the 8–12W operating range.
The ITO platform is particularly used in DORIC and some ARGUS Pod systems.
Examples of compatible systems include;
can be cited.
It should be checked whether the cartridge used is an integrated coil pod or an empty pod where ITO Coil is inserted.
There is no single cartridge system in the ARGUS device family.
In some ARGUS models, the coil is integrated into the cartridge; when the coil wears out, the entire cartridge is replaced.
In some compatible empty pod systems, a separate ITO Coil can be used.
In an "ARGUS Coil" search, the exact model of the device and the cartridge used must be checked. An integrated coil cartridge and a separate ITO Coil system may both exist in the same ARGUS family.
In integrated coil cartridges like the ARGUS Top Fill Cartridge, the metal coil is not removed and replaced separately.
Different resistance options such as 0.4Ω, 0.7Ω, and 1.0Ω can be offered directly inside the cartridge.
When the coil reaches the end of its life, the entire cartridge is replaced.
No.
A separate replaceable metal coil inserted into a compatible empty pod.
The coil is fixed inside the cartridge, and the entire cartridge is replaced.
In current VMATE devices, a pod system where the coil is integrated into the cartridge is mainly used.
Resistance options such as 0.4Ω, 0.7Ω, and 1.0Ω may be available in cartridges like the VMATE Top Fill and similar ones.
When the coil reaches the end of its life, the entire cartridge is replaced.
There is a very wide resistance range in VOOPOO coil systems.
These are general classifications. The coil platform and the manufacturer's technical information are always paramount.
No.
In the VOOPOO product family, a 0.3Ω resistance value can be found in different coil platforms such as;
These are similar only in terms of resistance and are not physically interchangeable.
Not always.
For example, for the same 0.15Ω value, there are different power values such as;
Wattage should not be estimated from the ohm value. The power range specified on the coil or in VOOPOO's technical information should be used.
There is no single wattage value for VOOPOO coils.
There are very wide power ranges, for example;
A significant portion of VOOPOO's current coil platforms use a mesh heating structure.
Mesh coil is a heating element design with a different and larger surface area compared to classic round wire.
Different mesh structures are used in the PnP X, PnP VM/TW, TPP, and ITO platforms.
The term "mesh" by itself does not mean DTL; there are also low-power MTL mesh coils like the 1.2Ω ITO.
The following order can be used for selecting the correct VOOPOO coil:
No.
When a new VOOPOO coil is installed, the cotton inside must be completely saturated with e-liquid before the first use.
VOOPOO technical support recommends waiting at least about 5 minutes after the new coil is installed and e-liquid is filled.
On devices with adjustable wattage, starting from the lower end of the recommended power range for the first few puffs can be preferred.
A new coil should not be fired while dry. Firing before the cotton has sufficiently absorbed e-liquid can cause the coil to taste burnt from the very first use.
A significant portion of modern VOOPOO coils are push-to-fit, meaning they fit into place by being pressed.
Therefore, the phrase "tighten the coil well" found in old texts is not correct for all VOOPOO products.
The coil;
and the installation method of the pod/tank being used should be applied.
Priming is the process of completely saturating the cotton inside a new coil with e-liquid before the first use.
A coil that is not primed can run with dry cotton, and this situation can cause a permanent burnt taste.
VOOPOO also recommends using an appropriate low wattage for the first few puffs of a new coil.
There is no fixed 15-minute waiting rule for all VOOPOO coils.
In VOOPOO's current technical support, it is stated to wait at least about 5 minutes after the new coil is filled.
Although it is possible to wait longer for some products or e-liquid structures, the correct approach is to follow the device's own instructions and not to fire until the cotton is completely saturated.
There is no fixed number of days applicable to all models for VOOPOO coil life.
In VOOPOO's current maintenance guide, it is stated that normal coil life can vary from a few days to a few weeks depending on e-liquid, wattage, and usage style.
Coil life can be affected by;
When the coil starts to reach the end of its life;
symptoms may be seen.
Dry Hit is the condition of a dry and burnt taste that occurs as a result of heating the coil when the cotton inside is not carrying enough e-liquid.
Not priming the new coil, low liquid level, high wattage, or intense back-to-back puffs can increase the risk of a dry hit.
Ready-to-use VOOPOO coils are consumable parts that contain the metal body, cotton, and heating element together.
A ready-to-use coil that has reached the end of its life is not designed to be re-cottoned in standard use.
In case of a permanent burnt taste or noticeable performance loss, it should be replaced with a suitable new coil.
The maintenance structure of rebuildable systems like PnP RBA is different from ready-to-use coil systems.
Salt liquid can be used in low-power MTL VOOPOO coil and cartridge systems.
However, especially Salt liquids with high nicotine concentrations should not be evaluated in the same usage class as high-wattage DTL coils.
Low-power options such as PnP X 0.8Ω / 1.0Ω and ITO 1.0Ω / 1.2Ω.
High-wattage coil systems such as PnP X 0.15Ω or TPP-DM3.
You can review the Salt Liquid category for Salt liquid options.
Freebase e-liquids with appropriate nicotine concentration and VG/PG ratio can be used in different VOOPOO coil systems.
Low-nicotine Freebase e-liquids are in the common usage class for low-resistance PnP X, PnP, and TPP DTL coils.
Freebase products prepared for MTL use can also be used in suitable high-resistance coils.
VG/PG selection should not be made based solely on the VOOPOO brand name or ohm value.
In selection;
should be evaluated together.
For example, while low-resistance DTL coils in the VOOPOO PnP X platform support higher VG ratios, more fluid 50VG class e-liquids come to the fore in MTL options such as 0.8Ω and 1.0Ω.
You can review the Electronic Cigarette Liquid category for liquid options.
Incorrect coil installation or damage to the gasket section can be one of the reasons for leakage, but not every leak is coil-related.
Leakage can be caused by;
situations like these.
The best VOOPOO Coil is not the same product for everyone.
First, device and cartridge/tank compatibility must be determined.
VOOPOO Coil prices may vary depending on the coil platform, resistance, number of items per package, and the mesh technology used.
When comparing prices;
should be evaluated together.
When comparing PnP X Coil prices, it should be remembered that the usage purpose and wattage values of different resistance options from 0.15Ω to 1.0Ω are different.
In particular, it is not correct for MTL and DTL users to choose the same coil resistance based solely on price.
Since there are VM, TW, TM, R, and different coil series in the old PnP Coil platform, the product name must be checked exactly.
The expression "PnP Coil" alone is not enough to determine the correct resistance.
TPP Coil packages have different resistance and wattage options depending on the coil model.
In particular, even though TPP-DM1 and TPP-DM3 are at the same 0.15Ω resistance, their power ranges are different.
There are 0.5Ω, 0.7Ω, 1.0Ω, and 1.2Ω options in the ITO Coil family.
When evaluating ITO coil prices, it should be verified that the pod being used supports a separate coil; if an integrated coil cartridge is used, an ITO Coil may not need to be purchased separately.
When evaluating buy VOOPOO Coil options, one should not look only at the brand and ohm value.
In the product description;
