VOOPOO ARGUS Pod Cartridge 3-Pack
Original VOOPOO replacement cartridge series with a top-fill, integrated coil structure
developed for the ARGUS Pod family.
0.4Ω / 0.7Ω / 1.0Ω
2 mL / 3 mL
Top Fill
3 Cartridges
Integrated Coil
VOOPOO ARGUS Top Fill Cartridge
VOOPOO ARGUS Pod cartridges are refillable cartridges developed to be compatible with the
ARGUS Pod family. Since the coil is integrated into the cartridge, no separate coil installation
or replacement is required. When the coil reaches the end of its lifespan, the entire cartridge
is replaced with a new one.
The top-fill design allows for easier e-liquid refilling without removing the cartridge from
the device. The magnetic connection system helps attach the cartridge securely and practically
to the device.
Resistance options in the manufacturer series:
0.4Ω, 0.7Ω, and 1.0Ω. The resistance value to be shipped must be selected from the product options.
Which Resistance Should Be Chosen?
0.4Ω
18–30W
RDL and a more open draw
Denser vapor and a warmer draw
More suitable for freebase e-liquids
0.7Ω
14–18W
Loose MTL or restricted RDL
Balanced usage between flavor and vapor
Can be used with salt or freebase e-liquids of appropriate viscosity
1.0Ω
10–14W
Tighter MTL draw
Less vapor and more controlled inhalation
An appropriate option for salt e-liquid use
| Resistance |
Manufacturer Power Range |
Vaping Type |
E-liquid Preference |
General Character |
| 0.4Ω |
18–30W |
RDL |
Freebase |
Dense vapor, open and warm draw |
| 0.7Ω |
14–18W |
Loose MTL / RDL |
Salt or freebase |
Balanced flavor and vapor |
| 1.0Ω |
10–14W |
MTL |
Salt e-liquid |
Tight, low-power, and controlled draw |
Important compatibility warning for the 0.4Ω cartridge:
VOOPOO recommends the 0.4Ω cartridge for ARGUS Pod family devices capable of delivering a 30W output.
Even though the cartridge may physically fit into the slot of some older low-power models, the device
might not provide sufficient power. The 0.4Ω option is not recommended especially for low-power models
like the older ARGUS G.
E-liquid Selection
As resistance decreases, the cartridge generally operates at higher power, consumes more e-liquid,
and produces denser vapor. As resistance increases, tighter and lower-power MTL usage comes to the forefront.
0.4Ω
More suitable for low-nicotine freebase e-liquids and higher VG ratios.
0.7Ω
Can be used with medium-viscosity freebase e-liquids or salt e-liquids at an appropriate nicotine level.
1.0Ω
One of the most suitable options in the series for MTL usage and salt nicotine e-liquids.
When choosing an e-liquid, not only the coil resistance but also the power supported by the device,
the manufacturer's recommended wattage range, the VG/PG ratio of the e-liquid, and the nicotine level
should be taken into consideration.
Technical Specifications
| Product Name |
VOOPOO ARGUS Top Fill Cartridge |
| Resistance Options |
0.4Ω / 0.7Ω / 1.0Ω |
| Capacity |
2 mL or 3 mL; may vary by version and region |
| Filling System |
Top / top-side filling |
| Coil Structure |
Integrated coil – cannot be replaced separately |
| Cartridge Material |
PCTG |
| Connection |
Magnetic pod connection |
| Package Contents |
3 cartridges with the same resistance value |
Capacity and packaging appearance may vary depending on the production version or regional regulations.
The manufacturer states that new and old packaging may be sent mixed.
iCOSM CODE 2.0 Cartridge Technology
VOOPOO's iCOSM CODE 2.0 technology is used in the current ARGUS Top Fill Cartridge V2 series.
The Liquid-Seal Shield, Mega-Core, and Golden Cotton components work together to improve leak control,
e-liquid delivery, and flavor stability.
The manufacturer's statements of “usage up to 100 mL” and “clean usage up to 30 days” are performance
declarations based on laboratory conditions. Actual cartridge lifespan varies depending on the e-liquid used,
wattage value, frequency of inhalation, and usage habits.
Compatible ARGUS Pod Family Devices
The cartridge body is compatible with the following ARGUS Pod family devices. However, since the power
supported by each device differs, the resistance to be chosen should be checked additionally.
- VOOPOO ARGUS G4
- VOOPOO ARGUS G4 Mini
- VOOPOO ARGUS G3
- VOOPOO ARGUS G3 Mini
- VOOPOO ARGUS G2
- VOOPOO ARGUS G2 Mini
- VOOPOO ARGUS G
- VOOPOO ARGUS G SE
- VOOPOO ARGUS P3
- VOOPOO ARGUS P2
- VOOPOO ARGUS P1
- VOOPOO ARGUS P1S
- VOOPOO ARGUS Z3
- VOOPOO ARGUS Z2
- VOOPOO ARGUS Z
- VOOPOO ARGUS A
- VOOPOO ARGUS Klyc
- VOOPOO ARGUS Pod
- VOOPOO ARGUS Pod SE
Not compatible: Not compatible with VOOPOO ARGUS Pro, ARGUS Pro 2, ARGUS GT,
ARGUS MT, and other devices using PnP/PnP X coils or cartridges. Not every VOOPOO device carrying
the name “ARGUS” uses the same cartridge system.
First Use and Filling
- Open the top filling cap on the mouthpiece section of the cartridge.
- Fill the cartridge through the e-liquid filling hole; do not pour e-liquid into the center airflow channel.
- Close the filling cap completely and securely.
- Wait approximately 10 minutes before using the new cartridge for the first time.
- Place the cartridge into the device and use it within the appropriate power range.
Do not fire while the cartridge is empty. Using a new cartridge immediately after filling it with e-liquid
can cause the cotton to burn and create a permanent burnt taste.
Package Contents
3 × VOOPOO ARGUS Pod Cartridge
The cartridges in the selected package have the same resistance value.
The coil is integrated into the cartridge. You do not need to purchase a separate coil or install a coil into the cartridge.
Important Check and Return Warning
Please check your device model and the resistance value of the cartridge you want to purchase before placing an order.
The resistance value is written on the cartridge. If you are unsure of its compatibility with your device,
you can contact our support line for information before opening the product.
Due to hygiene and resalability conditions, returns and exchanges cannot be made on coils and cartridges
whose packaging has been opened, e-liquid has been filled, or usage has been attempted.
