Dotmod dotCoil 5-Pack
The Dotmod dotCoil series is a replaceable coil platform designed for Dotmod devices, featuring a full brass body, single mesh heating structure, and 0.15Ω, 0.3Ω, and 0.6Ω resistance options.
0.15Ω / 0.3Ω / 0.6Ω
Single Mesh
Full Brass Build
Dotmod Compatible
5-Pack
Key Features of dotCoil
Single Mesh
Wide and balanced heating surface
Brass Body
Full brass coil construction
3 Resistances
0.15Ω, 0.3Ω, and 0.6Ω options
5-Pack
5 coils, each in individual blister packaging
The dotCoil series was developed to create a common coil platform across Dotmod's various AIO, pod, and tank systems.
The single mesh heating structure helps e-liquid vaporize evenly over a large surface area, keeping flavor performance more consistent.
Which dotCoil Should You Choose?
0.15Ω
DL
Draw:
Aier
Vapor:
Denser
Character:
High power and direct-to-lung focused
An outstanding resistance option for users looking for denser vapor and an airier airflow.
0.3Ω
RDL / DL
Draw:
Medium-airy
Vapor:
Rich and balanced
Character:
Flavor and vapor balance
A well-balanced alternative for those wanting controlled DL or a slightly looser RDL experience.
0.6Ω
RDL / Airy MTL
Draw:
More controlled
Vapor:
Medium density
Character:
Lower power and controlled use
Suitable for users who prefer calmer vapor production and a more controlled draw.
PAY ATTENTION TO 0.15Ω COIL COMPATIBILITY:
The 0.15Ω dotCoil is NOT compatible with the
dotStick Revo, dotStick Revo V1.5, and dotPod Max models.
For these devices, you should choose the appropriate 0.3Ω or 0.6Ω resistance option supported by the device.
Technical Specifications
| Product |
Dotmod dotCoil |
| Coil Structure |
Single Mesh |
| Body Structure |
Full brass construction |
| Resistance Options |
0.15Ω / 0.3Ω / 0.6Ω |
| 0.15Ω |
DL and denser vapor-oriented use |
| 0.3Ω |
RDL / DL balanced use |
| 0.6Ω |
RDL / airy MTL and more controlled use |
| Usage |
Compatible Dotmod atomizers, tanks, and pod systems |
| Package Contents |
5 individually blister-packed dotCoils |
Compatible Dotmod Models
According to Dotmod's current compatibility list, the dotCoil platform can be used with the following device and tank systems.
Dotmod dotAIO V2
Dotmod dotAIO V2 Lite
Dotmod dotTank 25mm
dotStick Revo
0.15Ω NOT COMPATIBLE
dotStick Revo V1.5
0.15Ω NOT COMPATIBLE
dotPod Max
0.15Ω NOT COMPATIBLE
Dotmod dotAIO Tank V3
Dotmod dotTank Max
Dotmod dotAMP
Dotmod × Mission XV dotApollo
Dotmod dotAIO V3
Compatibility Check:
Even on devices using the exact same dotCoil platform, support for every single resistance option is not guaranteed.
Make sure your device supports the specific resistance option before ordering, especially the 0.15Ω variant.
Suitable E-Liquid and Vaping Character
| Coil |
General Vaping Style |
General E-Liquid Preference |
Character |
| 0.15Ω |
DL |
Low-nicotine, medium-to-high VG freebase e-liquids |
Dense vapor and open draw |
| 0.3Ω |
RDL / DL |
Balanced or medium-to-high VG freebase e-liquids |
Flavor and vapor balance |
| 0.6Ω |
RDL / Airy MTL |
50/50 or balanced VG/PG ratio e-liquids |
More controlled use |
Note:
E-liquid choice should not be based solely on coil resistance.
The device's power output, airflow, VG/PG ratio, nicotine level, and personal usage habits should all be evaluated together.
Things to Consider When Using a New dotCoil
-
Install the new coil securely so it seats completely inside the compatible tank or cartridge.
-
After filling with e-liquid, wait approximately 10 minutes before first use to allow the coil cotton to fully saturate.
-
Do not fire the device when there is insufficient e-liquid inside the tank or cartridge.
-
Do not exceed the power output limits recommended for the device and coil.
-
Instead of taking rapid consecutive puffs, allow time for the coil cotton to re-absorb e-liquid.
-
Replace the coil when you notice a burnt taste, noticeable loss of flavor, or a drop in performance.
-
Keep the coil and tank contact points clean and ensure the coil is firmly seated in its housing.
Package Contents
5 × Dotmod dotCoil
Each package contains 5 dotCoils of the same resistance option chosen from the product selections.
Each coil is individually packaged in a blister pack.
It is recommended to check the resistance value on your current coil before placing an order.
