GEEKVAPE AEGIS FORCE
GeekVape Aegis Force Empty Pod Cartridge 2-Pack
The GeekVape Aegis Force Cartridge Pod is an empty replacement pod with a 5ml capacity and a replaceable coil system, developed for the Aegis Force 3200mAh device. Operating with the GeekVape B Series Coil platform, it offers DTL, RDL, and MTL vaping options within a single cartridge system.
5ml Capacity
TPD: 2ml
B Series Coil
MTL / RDL / DTL
2-Pack
NO COILS ARE INCLUDED IN THE PACKAGE.
The Aegis Force cartridge uses the replaceable
GeekVape B Series Coil system.
Compatible coils must be purchased separately.
Aegis Force Pod Features
The GeekVape Aegis Force Pod allows different B Series Coil options to be used within the same cartridge, enabling you to change the vaping character based on your coil and drip tip selection.
5 ml
Standard cartridge capacity
2 ml
TPD cartridge capacity
B Series
Replaceable coil platform
MTL + DTL
Diverse vaping options
B Series Coil Resistance and Wattage Options
DTL — Direct to Lung Vaping
0.2Ω
50 – 58W
0.3Ω
30 – 38W
RDL — Restricted Direct to Lung Vaping
0.4Ω
25 – 35W
0.6Ω
15 – 25W
MTL — Mouth to Lung Vaping
0.8Ω
12 – 16W
1.2Ω
8 – 12W
0.15Ω Support:
GeekVape also lists the 0.15Ω B Series option among compatible resistances in the Aegis Force cartridge parameters. Before use, verify the wattage range specified on the coil and your device's supported output power.
E-Liquid Selection by Coil Resistance
As the resistance, airflow, and wattage used in the GeekVape B Series Coil family change, the appropriate e-liquid character changes as well. The manufacturer's current B Series Coil classification is as follows.
DTL
0.2Ω / 0.3Ω
Coil options intended for higher power output and denser vapor production. GeekVape specifies Freebase ≤ 3 mg e-liquids for these resistances.
RDL
0.4Ω / 0.6Ω
Offers more controlled power and airflow. GeekVape recommends Freebase or compatible Nic Salt usage options for this group.
MTL
0.8Ω / 1.2Ω
MTL coil options operating at lower power. GeekVape classifies these resistances among MTL options intended for Nic Salt use.
About E-Liquid Selection:
E-liquids should not be chosen based solely on coil resistance. Nicotine strength, VG/PG ratio, wattage used, airflow, and personal vaping habits should all be evaluated together.
Technical Specifications
| Product Model |
GeekVape Aegis Force Cartridge Pod |
| Product Type |
Empty pod cartridge with replaceable coil |
| Cartridge Capacity |
5 ml |
| TPD Capacity |
2 ml |
| Coil Platform |
GeekVape B Series Coil |
| Compatible Resistances |
0.15 / 0.2 / 0.3 / 0.4 / 0.6 / 0.8 / 1.2Ω |
| DTL / RDL |
0.15 / 0.2 / 0.3 / 0.4 / 0.6Ω |
| MTL |
0.8 / 1.2Ω |
| Compatible Device |
GeekVape Aegis Force 3200mAh |
| Package Quantity |
2 empty Aegis Force cartridges |
| Coils Included? |
No |
MTL, RDL, and DTL Vaping
DTL
Designed for lower resistance, higher power, and a looser draw characteristic.
RDL
Offers a more controlled airflow and balanced power usage between DTL and MTL.
MTL
Higher resistance, lower wattage, and a tighter mouth-to-lung draw.
While the Aegis Force package comes with DTL drip tips pre-installed, a spare MTL drip tip is also included for MTL use. You can personalize your vaping style by changing both the coil and the drip tip together.
How to Use a New B Series Coil?
Check the resistance value of the B Series Coil you are going to use.
Fully insert the coil into its slot inside the cartridge.
Fill the cartridge with your preferred suitable e-liquid.
Wait for the coil cotton to completely absorb the e-liquid before first use.
WAIT 10–15 MINUTES ON FIRST USE.
Do not fire the device immediately after installing a new coil and filling the cartridge with e-liquid.
Wait approximately 10–15 minutes for the cotton inside the coil to fully saturate with liquid.
Firing with dry cotton can cause the coil to burn and lead to a permanent burnt taste.
Important Usage Precautions
-
Do not use the device without a suitable B Series Coil installed in the cartridge.
-
Ensure the coil is fully seated in the cartridge slot.
-
Do not fire the device when there is no e-liquid inside the cartridge.
-
When using a new coil, wait 10–15 minutes before firing for the first time.
-
Do not exceed the recommended wattage range specified on the coil.
-
Instead of taking rapid consecutive puffs, give the coil cotton time to re-absorb e-liquid.
-
Replace the coil when you experience a burnt taste, noticeable loss of flavor, or a drop in performance.
-
Keep the connection points of the cartridge and device dry and clean.
Package Contents
2 ×
GeekVape Aegis Force Empty Pod Cartridge
5 ml (TPD: 2 ml)
2 ×
Pre-installed DTL Drip Tips
1 ×
Spare MTL Drip Tip
1 ×
User Manual / Warning Document
COILS ARE NOT INCLUDED IN THE PACKAGE.
A compatible GeekVape B Series Coil is required separately for use.
