Hellvape Dead Rabbit 4 RDA is a rebuildable atomizer developed for experienced users who want to customize their flavor and vapor performance with a postless build deck that supports both single and dual coil configurations.
The Rabbit-Ear airflow columns and honeycomb-shaped air channels help direct air towards the coil surface in a balanced way. The optimized internal chamber structure is designed to achieve intense flavor delivery and smooth airflow.
The postless build deck design of the Dead Rabbit 4 RDA allows for both single and dual coil configurations. The internal chamber can be optimized for a single coil setup using the single coil adapter included in the box.
Cutting the coil legs to the appropriate length and tightening the connection screws on the deck evenly is important for correct coil positioning. After the coil is placed, the distance to the air channels should be checked.
Hellvape's Rabbit-Ear designed airflow walls direct the air received from the outside into the Honeycomb channels located in the center. The numerous small air holes help the air distribute more evenly over the coil surface.
Thanks to the adjustable airflow, you can choose between a more controlled and flavor-focused draw or a more open, high-vapor DTL draw.
Dead Rabbit 4 is an RDA atomizer and does not have a glass liquid reservoir like classic tank atomizers. In standard use, e-liquid is dripped directly onto the cotton and coil from the top.
When the BF Bottom Feed pin included in the box is installed, it can be used with compatible squonk mods. In a squonk system, pressing the bottle inside the mod sends e-liquid to the deck section of the atomizer via the BF pin.
For standard 510-connected mods, the normal 510 pin that comes pre-installed in the box should be used. The BF pin should only be used with appropriate squonk mods.
The package contains two different 810 drip tips, one stainless steel and one made of AG+ material. Users can switch between the two options based on preferences for appearance, mouthfeel, and heat transfer.
Additionally, thanks to the 510 drip tip adapter included in the box, compatible 510 mouthpieces can also be used.
Brand: Hellvape
Model: Dead Rabbit 4 RDA
Atomizer type: Rebuildable dripping atomizer
Vaping style: DTL
Diameter: 24mm
Height: 32.8mm
Net weight: Approx. 43g
Build deck: Postless deck
Coil support: Single or dual coil
Airflow: Rabbit-Ear and Honeycomb system
Drip tip: 810
Drip tip options: Stainless steel and AG+
Mod connection: Standard 510
Squonk compatibility: BF pin support
✓ Postless deck supporting single and dual coil configurations
✓ Chamber adapter special for single coil use
✓ Rabbit-Ear airflow columns
✓ Honeycomb-shaped air direction channels
✓ Internal chamber optimized for flavor and vapor performance
✓ Two different 810 drip tip options
✓ 510 drip tip adapter
✓ Squonk mod compatibility with BF pin
1 × Hellvape Dead Rabbit 4 RDA
2 × Shoelace cotton
2 × Approx. 0.37Ω Ni80 Clapton coil
1 × Single coil adapter
1 × 810 metal drip tip – pre-installed
1 × 810 AG+ drip tip
1 × 510 drip tip adapter
1 × BF Bottom Feed pin
1 × Spare parts pack
1 × User manual
This product is not a classic tank using pre-built coils. It requires knowledge of coil wrapping, coil placement, wicking, resistance measurement, and battery safety.
After installation is complete, check the coil resistance using a reliable ohm meter or a protected electronic mod. If a short circuit, loose connection, or unstable resistance is detected, do not fire the device.
In a dual coil configuration, the total resistance seen on the screen may be lower than the individual resistance values of the two coils used. Ensure that the safe current capacity of the battery used is suitable for the configuration.
Before the first use, fully saturate all the cotton with e-liquid. Do not fire while the cotton is dry, and check that the coil does not come into contact with the atomizer cap.
