HellVape Dead Rabbit MTL 2 RTA Tank

Hellvape Dead Rabbit MTL 2 RTA is a rebuildable tank atomizer developed for MTL users who want to adjust their draw character in detail, featuring a single coil postless build deck, interchangeable bottom air pins, and integrated juice flow control.

The 22.5mm diameter stainless steel body offers a look compatible with compact mods. Thanks to its six different air pins, various airflow options can be created, ranging from a tight MTL draw to a looser MTL draw.

The Dead Rabbit MTL 2 RTA comes with six different air pins that allow the airflow to be delivered directly under the coil. As the air pin diameter gets smaller, the draw tightens; as the diameter gets larger, a looser and more airy MTL draw is achieved.

The 1.2mm air pin comes pre-installed on the atomizer. By using the external airflow ring located at the bottom, the amount of air for the selected pin can be further fine-tuned.

The expanded single coil deck features a postless design that allows coil legs to be placed directly into the connection points. Coil legs are secured onto the deck using Phillips head screws.

The deck structure is designed for use with thin MTL wires and small-structured MTL Clapton coils. The compatibility of the physical dimensions of the wire or coil to be used with the deck connection points should be checked before installation.

The integrated Juice Flow Control system helps to control the amount of e-liquid passing from the tank section to the cotton and coil chamber.

It is recommended to close the juice flow before refilling and reopen it after refilling is complete. The correct setting may vary depending on the viscosity of the e-liquid used, the amount of cotton, and the frequency of use. Over-feeding can cause flooding and gurgling, while under-feeding can lead to dry hits.

The Dead Rabbit MTL 2 RTA has a 2ml e-liquid capacity with its standard setup. The capacity can be increased to 4ml by using the extended chimney and 4ml glass tank included in the package.

The top cap, which opens with a quarter turn, allows quick access to the filling ports. E-liquid filling should be done through the side filling channels, and liquid should not be spilled into the central airflow chimney.

Thanks to its MTL structure, the device can be used with standard e-liquids of appropriate consistency and salt nicotine liquids. When choosing an e-liquid, the coil resistance, coil structure, wattage value, and the user's nicotine needs should be evaluated together.

E-liquids with high nicotine ratios should be used at low power and in a controlled manner. Nicotine is addictive; if dizziness, nausea, or discomfort occurs during use, stop using it.