Original V18 Mini Mesh replacement coil series developed for the SMOK TFV18 Mini Tank. Available in 0.15Ω, 0.2Ω, and 0.33Ω options, delivering strong flavor and intense DTL vapor performance across different wattage levels.
If your tank or current coil reads V18 Mini / TFV18 Mini, you should choose this product.
If it reads only TFV18, you need to purchase the product on the full-size TFV18 coil page.
Operating range: 40–80W
Recommended value: 60W
Balanced flavor and vapor
Lower power consumption
More controlled DTL option of the series
Operating range: 80–140W
Recommended value: 100–110W
Single mesh heating structure
High vapor capacity
Strong flavor and warm DTL draw
Operating range: 80–110W
Recommended value: 90W
Dual mesh heating structure
Fast and even heating
Dense vapor and pronounced flavor
The wattage value should always be set according to the operating range specified on the coil or packaging. The maximum wattage a device can reach does not mean the coil can be used at that power level.
| Coil | Structure | Operating Range | Recommended Watts | Vaping Style |
|---|---|---|---|---|
| 0.2Ω V18 Mini | Single Mesh | 40–80W | 60W | Balanced DTL |
| 0.33Ω V18 Mini | Single Mesh | 80–140W | 100–110W | High Wattage DTL |
| 0.15Ω V18 Mini | Dual Mesh | 80–110W | 90W | Dense Vapor DTL |
Coil compatibility is determined by the tank model used on the device, not by the mod section.
An R-Kiss 2 or another mod might have been paired with a different tank later on. If your current coil has markings like S1, S2, A1, A2, A3, or K1, do not order TFV18 Mini coils just by looking at the device name.
The current coil and tank must feature the V18 Mini / TFV18 Mini label.
V18 Mini coils are low-resistance, high-vapor DTL coils. Therefore, premium/freebase regular e-liquids suitable for sub-ohm usage should be preferred.
1. Properly empty any remaining e-liquid from the tank.
2. Open the tank base and remove the old coil.
3. Apply a few drops of e-liquid to the side cotton ports of the new coil.
4. Properly insert the new coil into the tank and verify it is fully seated.
5. Fill the tank with the appropriate e-liquid.
6. Wait at least 10–15 minutes before firing.
7. Start at a low wattage setting during initial use and gradually increase power.
Firing a tank with no e-liquid or using a new coil without waiting long enough can cause the cotton to burn and create a permanent burnt taste.
Coil lifespan varies based on the e-liquid used, wattage level, vaping frequency, and personal habits.
3 × SMOK V18 Mini replacement coils
The package contains three ready-made coils in your chosen resistance value. Different resistance options are not mixed within the same package.
