Dotmod DotPod Plus Replacement Pod Cartridge 2-Pack
Dotmod DotPod Plus cartridges feature a 3 ml e-liquid capacity, an integrated coil system,
and various resistance options, allowing you to tailor your DotPod Plus device's performance
to your personal preference.
3 ml Capacity
Integrated Coil
0.4Ω / 0.6Ω / 0.8Ω / 1.0Ω
MTL / RDL / DL
2-Pack
Key Features of the DotPod Plus Cartridge
3 ml Capacity
Sufficient e-liquid reservoir for daily use
Integrated Coil
Practical design eliminating the need for separate coil installations
4 Resistance Options
Options suitable for different draw and vapor preferences
Easy Refilling
Ability to add e-liquid without removing the cartridge from the device
The coil comes pre-installed inside the DotPod Plus cartridges.
Users do not need to install or replace coils separately.
When the coil reaches the end of its lifespan, the entire cartridge is replaced.
Which DotPod Plus Cartridge Should I Choose?
The diverse resistance options in the DotPod Plus cartridge family cater to various vaping styles,
ranging from users seeking denser vapor to those who prefer a tighter MTL draw.
0.4Ω
DL / RDL
Recommended Power:
28W – 35W
For users looking for an airier draw and denser vapor.
0.6Ω
RDL
Recommended Power:
22W – 24W
For those seeking a balanced experience between flavor and vapor.
0.8Ω
RDL / MTL
Recommended Power:
16W – 20W
For users wanting a more controlled draw and lower power usage.
1.0Ω
MTL
Recommended Power:
14W – 16W
For those who prefer a tighter, controlled mouth-to-lung draw.
Resistance selection:
As the ohm value decreases, higher power and denser vapor typically stand out;
as the resistance increases, lower power and a more controlled draw character become prominent.
The recommended wattage range specified for the cartridge should be observed during use.
Technical Specifications
| Product |
Dotmod DotPod Plus Replacement Pod |
| Cartridge Capacity |
3 ml |
| Coil System |
Integrated coil |
| Resistance Options |
0.4Ω / 0.6Ω / 0.8Ω / 1.0Ω |
| 0.4Ω Power Range |
28W – 35W |
| 0.6Ω Power Range |
22W – 24W |
| 0.8Ω Power Range |
16W – 20W |
| 1.0Ω Power Range |
14W – 16W |
| Filling System |
Side-fill system |
| Package Quantity |
2 DotPod Plus cartridges |
| Coil Included? |
Yes – the coil is integrated inside the cartridge |
Compatible Model
Dotmod DotPod Plus
Compatibility Warning:
Dotmod offers different cartridge options for various DotPod models.
Before placing an order, check your device's exact model name and make sure it is DotPod Plus.
How to Fill the Cartridge?
Thanks to the DotPod Plus side-fill system, you can add e-liquid without needing
to remove the cartridge from the device during each refill.
1
Open the e-liquid fill plug on the side of the cartridge.
2
Insert the tip of the e-liquid bottle into the fill port.
3
Add your e-liquid slowly without overfilling the cartridge.
4
Close the fill plug completely and check for any leaks.
WAIT 10 MINUTES BEFORE FIRST USE.
Do not fire the device immediately after filling a new cartridge.
Wait at least 10 minutes before first use to allow the cotton inside the coil to fully saturate with e-liquid.
E-Liquid and Cartridge Selection
| Resistance |
General Vaping Style |
General E-Liquid Preference |
Character |
| 0.4Ω |
DL / RDL |
Low nicotine freebase e-liquid |
Denser vapor |
| 0.6Ω |
RDL |
Balanced VG/PG e-liquid |
Flavor and vapor balance |
| 0.8Ω |
RDL / MTL |
E-liquids close to 50/50 ratio |
More controlled use |
| 1.0Ω |
MTL |
E-liquids close to 50/50 ratio |
Tighter draw |
Note:
E-liquid selection should not be based solely on coil resistance.
Nicotine strength, VG/PG ratio, operating power, and personal usage habits should be evaluated together.
Important Considerations During Use
-
Never fire the device when there is no e-liquid inside the cartridge.
-
Wait at least 10 minutes after filling a new cartridge for the first time.
-
Do not exceed the recommended wattage range specified for the cartridge.
-
Instead of taking continuous rapid puffs, allow time for the coil cotton to re-absorb e-liquid.
-
Do not allow the e-liquid level inside the cartridge to run completely empty.
-
Replace the cartridge when you experience a burnt taste, noticeable flavor loss, or a drop in performance.
-
Ensure the fill plug is completely closed and the cartridge contact points remain dry.
Package Contents
2 × Dotmod DotPod Plus Replacement Pod Cartridges
The package contains 2 DotPod Plus cartridges in your selected resistance value.
The coil comes pre-installed inside the cartridge.
You do not need to purchase coils separately.
When the coil reaches the end of its lifespan, the entire cartridge is replaced.
