SMOK RPM 40 Coil 5-Pack
The standard SMOK RPM Coil Series, known as SMOK RPM 40 Coils;
an original replacement coil family offering different resistance
options suitable for DL, RDL, and MTL vaping preferences.
Standard RPM Coil
5 Coils
MTL / RDL / DL
Press-Fit Installation
Organic Cotton
COMPATIBILITY CHECK: These coils are only compatible with pod models
that have "RPM" labeled on the cartridge. They do not fit cartridges
labeled "RPM 2", "RPM 3", "RPM 4", "LP2", "Nord", or "RGC".
About SMOK RPM Coil Series
Although this product is listed in our store as “SMOK RPM 40 Coil”,
the packaging and cartridge usually bear the label SMOK RPM Coil
or RPM Series.
Developed for the standard RPM cartridge of the RPM40 device, this
coil family was later used in many SMOK devices that feature an
RPM cartridge option. However, the same device may have other
cartridge options that use RPM 2, Nord, or different coils.
Compatibility should not be determined solely by the device name.
Always check the coil series printed on the bottom or side of the
plastic cartridge you are using.
RPM Coil Options
0.4Ω Mesh
RDL / DL Vaping
Recommended power: 25W
Designed for fast heating, balanced flavor, and denser vapor production.
0.6Ω Triple
RDL Vaping
Recommended power: 25W
Features a triple coil structure for an open draw and distinct vapor production.
0.3Ω MTL Mesh
Strong MTL / RDL
Recommended power: 10–20W
Provides flavor and controlled vapor balance at low power with a mesh structure.
0.8Ω DC MTL
MTL Vaping
Recommended power: 16W
Developed for more controlled vapor and a draw close to cigarette smoking.
1.0Ω SC
MTL Vaping
Recommended power: 14W
Offers low power consumption, controlled vapor, and distinct flavor.
1.2Ω Quartz
Tight MTL Vaping
Recommended power: 12W
Suitable for fast response and flavor-focused use at low power.
RPM Coil Comparison Table
| Coil Model |
Power Output |
Draw Style |
Vapor Level |
Liquid Recommendation |
| RPM Mesh 0.4Ω |
25W |
RDL / DL |
High |
Premium/freebase, ~50–70% VG |
| RPM Triple 0.6Ω |
25W |
RDL |
Medium-High |
Premium/freebase, ~50–60% VG |
| RPM MTL Mesh 0.3Ω |
10–20W |
MTL / RDL |
Medium |
50/50 freebase or low-density salt |
| RPM DC MTL 0.8Ω |
16W |
MTL |
Controlled |
50/50 salt or freebase |
| RPM SC 1.0Ω |
14W |
MTL |
Low-Controlled |
50/50 salt or freebase |
| RPM Quartz 1.2Ω |
12W |
Tight MTL |
Low |
50/50 salt or freebase |
If a different wattage is specified on the coil itself, the value
printed on the coil should be followed. New coils should be used
gradually, starting from lower power.
Compatible Devices and Cartridges
Compatible with the following devices only when using an
RPM Coil compatible RPM cartridge:
- SMOK RPM40 – Standard RPM cartridge
- SMOK Nord 2 – RPM cartridge only
- SMOK Nord 4 – RPM cartridge only (not RPM 2 cartridge)
- SMOK IPX 80 – RPM cartridge only (not RPM 2 cartridge)
- SMOK RPM 2 and RPM 2S – RPM cartridge only
- SMOK SCAR-P3 and SCAR-P5 – RPM cartridge only
- SMOK RPM80 and RPM80 Pro – RPM cartridge only
- SMOK Fetch Mini and Fetch Pro – RPM cartridge only
- SMOK Alike – RPM cartridge only
- SMOK Pozz X – RPM cartridge
- SMOK Nord X – RPM cartridge only
- SMOK Thallo and Thallo S – RPM cartridge only
- Original SMOK RPM 4 device – RPM cartridge only
In-Stock Compatible Cartridges and Devices
Incompatible Coil Systems
- SMOK RPM 2 Coils and RPM 2 cartridges
- SMOK RPM 3 Coils and RPM 3 cartridges
- New SMOK RPM 4 Coils and Nord 6 RPM 4 cartridge
- SMOK Nord Coil cartridges
- SMOK LP1 and LP2 coil cartridges
- SMOK RGC coil cartridges
- SMOK RPM160 and TFV series coils
“RPM40 Coil”, “RPM 2 Coil”, and the new “RPM 4 Coil” are all different.
Even if they look physically similar, they fit into different cartridges.
Liquid Selection for Your Coil
Using high-nicotine salt liquids in 0.4Ω and 0.6Ω coils is not recommended.
For salt liquids, MTL coil options that run at lower power should be preferred.
New Coil Installation
- Remove the cartridge from the device and pull the old coil out straight.
- Drip a few drops of liquid onto the cotton inlets of the new coil.
- Push the coil firmly into the slot at the bottom of the cartridge.
- Ensure there is no gap between the coil and the cartridge base.
- Fill the cartridge with suitable liquid without exceeding the maximum level.
- Close the filling cap tightly and wait 10–15 minutes.
- Start using the device at the lower end of the recommended wattage.
RPM coils are not screwed in; they are press-fitted. If the coil is
not fully seated, the device may not detect it, or liquid may pool
under the cartridge.
Package Contents
5 × SMOK RPM replacement coils in selected resistance
If the RBA option is chosen, the package content is usually 1 RBA unit,
differing from standard factory coils. RBA should only be used by
experienced users familiar with coil building and battery safety.
Cartridge, device, or liquid are not included in the package.
IMPORTANT WARNING: Opened, tested, or e-liquid-contacted coils may not be
eligible for return/exchange due to hygiene and resale conditions. Check the
model information on the coil and cartridge before opening the package.
If you are unsure, please contact our support team.
