Original Vaporesso GTX replacement coil series supporting MTL, RDL, and DTL vaping styles.
5 Pcs/Pack Mesh and Dual Mesh 0.15Ω–1.2Ω Press-Fit Installation
The GTX series offers a wide usage range, from low-resistance, high-vapor-focused DTL options to MTL coil choices providing a tighter draw.
0.15Ω, 0.2Ω, and 0.3Ω
High power, open airflow, and dense vapor.
0.4Ω and 0.6Ω
Balanced flavor, vapor, and power consumption.
0.8Ω and 1.2Ω
Low power consumption and close to cigarette-style draw.
| Coil Option | Vaping Style | Wattage Range | Recommended Value | E-Liquid Preference |
|---|---|---|---|---|
| GTX 0.15Ω Mesh / Dual Mesh | DTL | 60–75W | 70W | Low-nicotine, high VG freebase |
| GTX 0.2Ω Mesh / Dual Mesh | DTL | 45–60W | 55W | Low-nicotine, high VG freebase |
| GTX 0.3Ω Mesh / Dual Mesh | DTL / RDL | 32–45W | 40W | Freebase, approx. 60–70% VG |
| GTX 0.4Ω Mesh | RDL | 26–32W | 30W | Balanced or high VG freebase |
| GTX 0.6Ω Mesh | RDL / Loose MTL | 20–26W | 24W | 50/50–60/40 freebase or suitable salt |
| GTX 0.8Ω Mesh | MTL | 12–16W | 16W | 50/50 salt or low-wattage freebase |
| GTX 1.2Ω Mesh | Tight MTL | 8–12W | 11W | 50/50 salt or MTL freebase |
For users who want the densest vapor and open DTL draws. Higher liquid and battery consumption.
Provides a balance between flavor and vapor. Suitable for medium to high-power GTX devices.
Provides balanced usage between RDL and loose MTL, lower power consumption, and distinct flavor.
Offers a tight draw, low liquid consumption, and salt nicotine compatibility for MTL users.
Suitable for users who want the tightest MTL draw and the lowest power consumption.
Focuses on strong flavor and fast vapor production thanks to a larger heating surface.
| Pod / Tank Platform | Compatible GTX Range | Suitable Vaping |
|---|---|---|
| LUXE XR DTL Empty Pod | 0.15Ω–0.4Ω | DTL / RDL |
| LUXE XR MTL Empty Pod | 0.6Ω–1.2Ω | MTL / RDL |
| Armour G Series DTL Pod | 0.15Ω–0.4Ω | DTL / RDL |
| Armour G Series MTL Pod | 0.6Ω–1.2Ω | MTL |
| Vaporesso xTank Pod | 0.15Ω–1.2Ω | Depends on pod and device power |
| Vaporesso xTank T | 0.4Ω–1.2Ω | RDL / MTL |
GTX coils can also be used in previous-generation GTX devices such as the Target PM80, Target PM80 SE, Target PM30, LUXE PM40, LUXE 80, LUXE 80S, Swag PX80, GEN Nano, GTX One, and XIRON, depending on pod and wattage support.
Developed for MTL, RDL, and DTL use on the GTX pod and xTank platforms.
For high-power DTL tanks such as the iTank, iTank 2, and iTank T.
Used in the NRG, SKRR, and some older generation Vaporesso atomizers.
Low-nicotine freebase and approx. 60–70% VG e-liquids are recommended.
High-nicotine salt e-liquids are not recommended.
Can be used with 50/50 or 60/40 freebase e-liquids. Depending on preference, a salt e-liquid of appropriate consistency can also be chosen.
More suitable for 50/50 salt e-liquids and freebase e-liquids suitable for MTL usage.
Apply a few drops of e-liquid to the side cotton channels of the coil.
Insert the coil completely into the bottom of the pod without leaving any gaps.
After filling the pod with e-liquid, wait for 10–15 minutes.
Start usage from the lower wattage value and gradually increase the power.
5 × Vaporesso GTX Replacement Coil
The package contains 5 coils, all identical to the ohm and coil model you selected. Different resistances are not mixed in a single package.
IMPORTANT WARNING
Do not fire the coil without e-liquid. Wait at least 10–15 minutes after installing a new coil and filling the pod.
Opened, tested, or removed coil products lose their resalability and are not covered by returns or exchanges.
Before placing your order, check the GTX label, ohm value, pod model, and recommended wattage range on the coil you use. If you are unsure about compatibility, contact our support line.
