Vaporesso GTi Coil 5-Pack
Original DTL mesh and dual mesh replacement coil series developed for Vaporesso iTank, iTank 2, and iTank T atomizer platforms.
5 Pcs/Pack
Mesh and Dual Mesh
30–90W Options
Press-Fit Installation
Vaporesso GTi Coil Platform
The GTi coil platform is the DTL coil system used in Vaporesso's iTank family. Thanks to wide airflow channels and a mesh heating surface, it offers high vapor production, balanced flavor, and fast heating performance.
The current GTi family includes new COREX-based Dual Mesh options alongside standard Mesh selections. The coil is installed by pressing it into the bottom of the tank using a tool-free Press-Fit system.
Wide Mesh Surface
Supports heating the e-liquid over a larger area and in a balanced manner.
DTL Performance
Developed for open airflow, dense vapor, and direct lung hits.
Easy Coil Change
Can be quickly installed and removed without turning any screws thanks to the Press-Fit structure.
GTi Coil Resistance and Wattage Values
| Coil Option |
Resistance |
Structure |
Usage Range |
Best Value |
| GTi 0.15Ω Mesh |
0.15Ω |
Mesh |
75–90W |
85W |
| GTi 0.2Ω Mesh |
0.2Ω |
Mesh |
60–75W |
65W |
| GTi 0.4Ω Mesh |
0.4Ω |
Mesh |
50–60W |
55W |
| GTi 0.5Ω Mesh |
0.5Ω |
Mesh |
30–40W |
35W |
| GTi 0.2Ω Dual Mesh |
0.2Ω |
COREX Dual Mesh |
60–75W |
65W |
| GTi 0.4Ω Dual Mesh |
0.4Ω |
COREX Dual Mesh |
50–60W |
55W |
Package Information: The package contains 5 units of the resistance and coil model you selected from the product options. The package does not consist of a mix of different resistance coils.
Dual Mesh models are next-generation options. When ordering, please check not only the resistance value but also whether "Mesh" or "Dual Mesh" is specified in the option.
Which GTi Coil Should Be Preferred?
0.15Ω – 85W
For users seeking the highest vapor production and a warmer DTL hit.
0.2Ω – 65W
Offers a strong balance between dense vapor and flavor performance.
0.4Ω – 55W
For those seeking more controlled power consumption and balanced DTL use.
0.5Ω – 35W
Offers lower power consumption, cooler vapor, and restricted DTL use.
0.2Ω Dual Mesh
Focuses on high vapor and strong flavor performance with a larger heating surface.
0.4Ω Dual Mesh
Combines the Dual Mesh structure with lower wattage and balanced usage.
Compatible Tanks
Vaporesso iTank
The GTi coil tank used in Target and first-generation GEN kits.
Vaporesso iTank 2
The updated tank used in GEN 200 and compatible Vaporesso kits.
Vaporesso iTank T
The next-generation GTi coil tank with top airflow and top filling.
The GTi coil is not the same as Vaporesso GT Core, GTX, or QF coil systems. Although the names GT, GTi, and GTX are similar, they cannot be used interchangeably.
Compatible Device Examples
- Vaporesso Target 80 – Version with iTank
- Vaporesso Target 100 and Target 200
- Vaporesso GEN 80S and GEN 200 – iTank/iTank 2 versions
- Vaporesso GEN SE and GEN Max – iTank T versions
- Vaporesso Armour S and Armour Max – iTank T
- Vaporesso Armour Ultra – iTank T Dual Mesh
- Other 510-threaded kits using iTank, iTank 2, or iTank T
Which E-Liquid Should Be Used?
The GTi coil series is a sub-ohm DTL coil family that produces high vapor. Therefore, it is suitable for use with low-nicotine premium/freebase e-liquids.
- 60VG/40PG or 70VG/30PG freebase e-liquids can be chosen for general use.
- 70VG-heavy DTL e-liquids are more suitable for 0.15Ω and 0.2Ω options.
- 0.4Ω and 0.5Ω options offer lower power and more controlled e-liquid consumption.
- E-liquids with intense sweeteners may create residue on the coil more quickly.
High-nicotine salt e-liquids are not suitable for use with sub-ohm DTL coils like GTi that produce high wattage and dense vapor.
Using a New GTi Coil
1
Remove the old coil by pulling it from the bottom of the tank.
2
Drop a few drops of e-liquid onto the visible cotton channels of the new coil.
3
Insert the coil completely, fill the tank with e-liquid, and wait for 10–15 minutes.
4
Start usage from a lower wattage setting and gradually increase the power.
IMPORTANT WARNING: Do not fire the coil without e-liquid. Wait 10–15 minutes after installing a new coil and filling the tank. If the coil is not fully seated in the tank slot, the device may not detect the coil, or e-liquid leakage may occur. Coils that have been opened, exposed to e-liquid, tested, or removed from their packaging lose their resalability and are not covered by returns or exchanges. Check the resistance and Mesh/Dual Mesh option before placing your order.
