VOOPOO PnP X Coil 5-Pack
Original mesh coil series developed for the VOOPOO PnP X platform, offering seven different resistance options ranging from MTL to high-vapor DTL vaping.
0.15Ω–1.0Ω
MTL / RDL / DTL
Mesh Heating System
Press-Fit Installation
5 Coils
VOOPOO PnP X Coil Series
PnP X coils are designed to adapt to different power, airflow, and e-liquid preferences. Lower resistance options produce dense vapor at higher wattage values, while higher resistance options offer a tight MTL experience at lower power.
The mesh-distributed heating system helps the coil surface heat more evenly. Its heat-resistant cotton structure and four-layer leak-proof technology are engineered for consistent flavor performance and more controlled e-liquid delivery.
PnP X is not the same as classic PnP:
PnP X coils are not compatible with older VOOPOO cartridges and tanks that only bear the marking "PnP". Classic PnP coils also cannot be installed into PnP X cartridges.
PnP X Coil Resistance and Wattage Chart
| Resistance |
Power Range |
Vaping Style |
Recommended VG Ratio |
General Usage |
| PnP X 0.15Ω |
60–80W |
DTL |
50%–70% VG |
Densest vapor and open draw |
| PnP X 0.20Ω |
40–60W |
DTL |
50%–70% VG |
Dense vapor and strong flavor |
| PnP X 0.30Ω |
32–40W |
DTL / RDL |
50%–70% VG |
Balanced vapor and flavor |
| PnP X 0.45Ω |
25–32W |
RDL |
50%–70% VG |
Restricted direct lung hit |
| PnP X 0.60Ω |
18–23W |
MTL / RDL |
50%–60% VG |
Loose MTL and low-power RDL |
| PnP X 0.80Ω |
12–16W |
MTL |
50% VG |
Tight and controlled draw |
| PnP X 1.0Ω |
10–13W |
MTL |
50% VG |
Lowest power and tight MTL |
All resistance options may not be in stock at all times. The package includes five coils featuring the specific resistance value you selected from the product options.
Which PnP X Coil Should Be Chosen?
DTL – Dense Vapor
The 0.15Ω and 0.20Ω options are suitable for users seeking high wattage, open airflow, and direct lung vaping.
RDL – Balanced Vaping
The 0.30Ω and 0.45Ω options provide a balanced use between flavor and vapor with more controlled airflow.
MTL – Tight Draw
The 0.60Ω, 0.80Ω, and 1.0Ω options are suitable for lower power MTL vaping resembling a cigarette draw.
The coil to be chosen should not be determined solely based on vaping style. The maximum power of the device, the MTL or DTL structure of the used PnP X cartridge, and airflow support should also be verified.
E-liquid Selection
0.15Ω–0.30Ω
Low-nicotine freebase e-liquids are recommended. Suitable for DTL vaping with e-liquids at a 50%–70% VG ratio.
0.45Ω–0.60Ω
Can be used with freebase e-liquids having a balanced VG/PG ratio. The 0.60Ω option can also work with appropriate low-viscosity MTL e-liquids.
0.80Ω–1.0Ω
More suitable for salt e-liquids at a 50/50 VG/PG ratio or freebase e-liquids suitable for MTL vaping.
Using high-nicotine salt e-liquids with low-resistance and high-wattage DTL coils is not recommended. Nicotine level, coil resistance, wattage value, and the e-liquid's VG/PG ratio should be evaluated together.
PnP X Platform Technology
Mesh Heating
Broad and even heating surface
Heat-Resistant Cotton
Balanced e-liquid saturation
Four-Layer Structure
Design improving leakage control
Press-Fit Installation
Coil replacement requiring no screws
Wide Resistance Range
MTL, RDL, and DTL options
Directional Fit Design
Securing a precise cartridge base seat
VOOPOO reports performance under laboratory conditions for PnP X coils up to 100 mL of e-liquid usage. Actual coil lifespan varies depending on the e-liquid used, wattage value, puff frequency, and usage habits.
Compatible PnP X Cartridges and Tanks
| Cartridge or Tank |
Recommended Coil Options |
Usage Type |
| PnP X DTL Cartridge |
0.15Ω / 0.20Ω / 0.30Ω |
DTL / RDL |
| PnP X MTL Cartridge |
0.30Ω / 0.60Ω |
MTL / RDL |
| PnP X Pod Tank DTL |
0.15Ω / 0.20Ω / 0.30Ω |
DTL / RDL |
| PnP X Pod Tank MTL |
0.30Ω / 0.60Ω |
MTL / RDL |
| UFORCE-X Tank |
All PnP X series; standard as 0.15Ω / 0.20Ω |
Primarily DTL |
| UFORCE-X Nano Tank |
PnP X coils matching the device's power support |
MTL / RDL / DTL |
| VINCI PnP X DTL Cartridge |
Low-resistance PnP X options |
DTL / RDL |
| VINCI PnP X MTL Cartridge |
High-resistance PnP X options |
MTL / RDL |
| ARGUS PnP X Cartridge |
0.30Ω / 0.45Ω / 0.60Ω / 0.80Ω / 1.0Ω |
MTL / RDL |
Every coil that can physically fit into a cartridge may not have appropriate power support for your device. For instance, a device with a 60W maximum output can only operate at the lower limit of the 0.15Ω coil which ranges from 60–80W. The maximum wattage supported by the device should be checked before purchasing.
Compatible Devices
The following devices can work with PnP X coils when using an appropriate PnP X cartridge or PnP X tank:
VOOPOO DRAG S2
VOOPOO DRAG X2
VOOPOO DRAG S3
VOOPOO DRAG X3
VOOPOO ARGUS Pro 2
VOOPOO ARGUS E40
VOOPOO DORIC 60 Pro
VOOPOO VINCI E120
VOOPOO DRAG 4
VOOPOO DRAG 5
VOOPOO DRAG M100S
VOOPOO VINCI Spark100
VOOPOO ARGUS GT II
VOOPOO ARGUS XT
VOOPOO ARGUS MT
PnP X DTL/MTL Pod Tank
UFORCE-X Tank
UFORCE-X Nano Tank
On 510-connection devices such as DRAG 4, DRAG 5, DRAG M100S, ARGUS GT II, ARGUS XT, and ARGUS MT, the PnP X coil is not installed directly into the mod. The coil is used by installing it inside a compatible UFORCE-X or PnP X tank.
Incompatible Devices
PnP X coils cannot be installed into older PnP devices using classic PnP cartridges such as VOOPOO DRAG S, DRAG X, VINCI, VINCI X, ARGUS Pro, ARGUS X, ARGUS Air, and similar models.
The cartridge used in the older "DRAG X PnP-X Kit" model, referred to as the PnP-X Pod, is also not identical to the current PnP X coil platform. This old cartridge uses classic PnP coils.
In devices utilizing the TPP platform like the DRAG X Pro, appropriate TPP coils should be used instead of PnP X.
How to Install the PnP X Coil?
- Turn off the device and remove the cartridge or tank from the device.
- Pull the old coil straight out from the bottom of the cartridge.
- Check the O-rings and connection parts of the new coil.
- Align the directional base of the coil with the cartridge slot.
- Press the coil straight down until it is completely seated.
- Make sure there is no gap between the coil and the cartridge base.
- Fill the cartridge approximately two-thirds full with e-liquid and close the fill cap.
- Wait about 10 minutes for the new coil's cotton to saturate with e-liquid.
- Start your first use at the lower end of the recommended wattage range.
PnP X coils are not screwed in. They are installed by pressing them into the cartridge. If the coil is not fully seated, the device may fail to recognize the coil, or e-liquid may leak from the bottom of the cartridge.
To Extend Coil Lifespan
Wait Before First Use
Allow about 10 minutes to pass after filling
Do Not Exceed Wattage
Use within the range specified by the manufacturer
Keep Coil Saturated
Refill before the e-liquid level drops too low
Avoid Chain Vaping
Give the cotton time to re-absorb e-liquid
Use Suitable VG/PG
Choose e-liquids matching the resistance value
Seat Coil Fully
Leave no gaps at the cartridge base
Package Contents
5 × Original VOOPOO PnP X Coil in Selected Resistance
All five coils in the package share the same resistance value. Mixed resistance options are not shipped.
Important Return and Compatibility Warning
Before placing an order, verify that your current existing coil bears the "PnP X" marking and check its resistance value. Classic PnP and PnP X coils with the same ohm value are not mutually compatible.
If you are unsure of its compatibility with your device or cartridge, you can contact our support line for information before opening the product.
Due to hygiene and resalability conditions, returns and exchanges cannot be accepted for coil products whose packaging has been opened, installed in a cartridge, come into contact with e-liquid, or been attempted for use.
