Availability: SOLD OUT

VOOPOO

-

voopoo-drag-s2

Voopoo Drag S2 Kit 60W Pod Mod Elektronik Sigara

2.635,00 TL
VOOPOO Drag S2 Kit 60W Pod Mod

2500mAh built-in battery, 5–60W adjustable power, and the new generation PnP X atomization platform

5–60W Power 2500mAh Battery PnP X Coil 5ml Cartridge GENE.TT 2.0

The VOOPOO Drag S2 is an advanced pod mod device that offers a 2500mAh built-in battery and adjustable power up to 60W in a compact body. The GENE.TT 2.0 chip helps determine the appropriate power range for the installed coil, while the Smart, RBA, and Eco operating modes allow you to customize your vaping experience.

The 5ml PnP X DTL cartridge included in the standard package is designed for DTL and RDL use, featuring a top airflow intake, a precise airflow adjustment ring, and a side-filling system. The improved structure of the PnP X platform helps reduce the risk of leaks caused by e-liquid and condensation.

VOOPOO Drag S2 60W Pod Mod Introduction Key Features
60W Adjustable Power

The 5–60W range allows for power adjustment suitable for different PnP X coil options.

????
2500mAh Built-in Battery

The built-in battery eliminates the need for external batteries and is charged via Type-C.

????
Adjustable Top Airflow

Using the airflow ring, you can achieve a tighter RDL or a more open DTL draw.

????
GENE.TT 2.0 Chip

Offers power management and ease of use with Smart, RBA, and Eco modes.

????
5ml PnP X Cartridge

Standard cartridge holds 5ml, while the TPD version has a 2ml e-liquid capacity.

????️
0.96-inch TFT Screen

Power, resistance, battery level, and usage information can be tracked via the color display.

VOOPOO Drag S2 color options VOOPOO Drag S2 Technical Specifications
Atomization Platform VOOPOO PnP X
Chipset GENE.TT 2.0
Output Power 5–60W adjustable
Output Voltage 3.2–4.2V
Supported Resistance 0.1–3.0Ω
Battery 2500mAh built-in battery
Operating Modes Smart / RBA / Eco
Display 0.96-inch TFT color screen
Cartridge PnP X DTL cartridge
E-liquid Capacity 5ml standard / 2ml TPD
Filling System Side-fill with silicone plug
Airflow Adjustable top airflow
Body Material Zinc alloy and leather finish
Charging USB Type-C, 5V/2A
Important Coil Compatibility Warning

The Drag S2 should only be used with coils and cartridges marked “PnP X”. Older generation VOOPOO PnP, PnP-VM, PnP-TW, and PnP-RBA products are not compatible with the PnP X platform.

Included PnP X Coils
Coil Power Range Vaping Type Package Status
PnP X 0.3Ω 32–40W RDL / DTL Pre-installed
PnP X 0.2Ω 40–60W DTL Spare
Note: The manufacturer-specified power range for the PnP X 0.15Ω coil is 60–80W. Since the Drag S2 provides a maximum of 60W, this coil is not an ideal choice for the device's power capacity. The 0.2Ω and 0.3Ω options included with the standard DTL cartridge are recommended.
VOOPOO Drag S2 Adjustable Top Airflow GENE.TT 2.0 Operating Modes
Smart Mode

Detects the installed coil and helps select the appropriate power range.

RBA Mode

Allows manual power adjustment within the 5–60W range based on user preference.

Eco Mode

Manages power consumption to help extend battery life.

About PnP X coil lifespan:

VOOPOO states in their lab tests that up to 100ml of e-liquid can be consumed with a single PnP X coil. Actual coil life varies depending on the e-liquid used, power level, filling habits, and frequency of use. Therefore, the 100ml value is not a guaranteed fixed lifespan.

VOOPOO Drag S2 Usage Tips VOOPOO Drag S2 Technical Parameters
Standard Package Content
1 × VOOPOO Drag S2 Device
1 × PnP X DTL Cartridge – 5ml
1 × PnP X 0.3Ω Coil – Pre-installed
1 × PnP X 0.2Ω Coil – Spare
1 × USB Type-C Charging Cable
1 × User Manual
1 × PnP X Platform Card

Package content and cartridge capacity may vary depending on the regional version of the product.

Steps for First Use
1

Check the orientation and insert the coil completely into the cartridge base.

2

Open the side-fill plug and fill the cartridge approximately two-thirds full.

3

Close the filling plug tightly and wait at least 5 minutes for the new coil to prime.

4

Start at the lower wattage of the recommended range and gradually increase the power.

VOOPOO Drag S2 Safety Features
Charging and Safe Use

The device's Type-C charging port supports 5V/2A charging. Use a high-quality Type-C cable and a reliable 5V USB power source. Do not leave the device unattended while charging; do not use it in extreme heat, wet conditions, or if damaged.

Drag S2 features protections against overtime, short-circuit, overcharge, output over-current, low battery, and chip over-temperature.

Color Options

Sky Blue, Champagne Golden, Checkered Black, Moss Green, Snow Blue, Modern Red, Glow Pink, Gray Metal, Spray Black, Colorful Silver, Pearl White, Retro, Marsala, Carbon Fiber, Classic, and Galaxy Blue.

Frequently Asked Questions
Can normal PnP coils be used with the Drag S2?

No. The Drag S2 is only compatible with the PnP X coil platform.

Is the Drag S2 DTL or MTL?

The DTL cartridge and 0.2/0.3Ω coils in the standard package are for DTL and RDL use. For a tighter MTL experience, a separate PnP X MTL cartridge and suitable PnP X coils are required.

Can I use it immediately after installing the coil?

No. After installing a new coil and filling the cartridge, you must wait at least 5 minutes for the cotton to saturate with e-liquid.

Does the Drag S2 use an external battery?

No. The device features a built-in 2500mAh capacity battery.

This product is intended only for adult users who meet the legal age requirement. E-liquids containing nicotine can be addictive. Keep out of reach of children and pets.
Write a review
NEWPRODUCTS

Whatsapp Contact