Next-generation pod mod electronic cigarette kit developed with external 18650 or 21700 battery support, a 1.66-inch touch screen, 80W maximum output, and the PnP X coil platform.
The Voopoo Drag X3 is a next-generation pod mod device powered by a single external battery, designed for DTL and RDL users who demand high power. With support for 18650 and 21700 batteries, it offers flexibility in battery choice. The zinc alloy body and leather finish combine a durable build with an ergonomic grip.
Power adjustment between 5–80W for different PnP X coil options.
Can be used with a single 18650 or 21700 external battery.
Large display for easy monitoring of settings and usage information.
Offers MTL, RDL, and DTL vaping options with the appropriate PnP X cartridge.
Touch security system designed to help reduce the risk of accidental activation.
Locating the airflow channel at the top helps reduce the risk of leakage.
810 connection drip tip on the DTL cartridge that can be changed according to user preference.
Short circuit, low battery, over-current, over-charge, and temperature protections.
The Drag X3 supports different vaping styles depending on the type of PnP X cartridge used. The DTL cartridge included in the box is specially designed for 0.15Ω, 0.2Ω, and 0.3Ω PnP X coils.
| Coil | Recommended Power | Vaping Style | Recommended E-Liquid Ratio |
|---|---|---|---|
| PnP X 0.15Ω | 60–80W | DTL | 50%–70% VG |
| PnP X 0.2Ω | 40–60W | DTL | 50%–70% VG |
| PnP X 0.3Ω | 32–40W | RDL / DTL | 50%–70% VG |
| PnP X 0.45Ω | 25–32W | RDL | 50%–70% VG |
| PnP X 0.6Ω | 18–23W | MTL / RDL | 50%–60% VG |
| PnP X 0.8Ω | 12–16W | MTL | 50% VG |
| PnP X 1.0Ω | 10–13W | MTL | 50% VG |
| Model | VOOPOO Drag X3 |
|---|---|
| Dimensions | Approx. 132.7 × 34.2 × 27.8 mm |
| Power range | 5–80W adjustable |
| Output voltage | 3.2–4.2V |
| Resistance range | 0.1–3.0Ω |
| Battery | 1 x 18650 or 1 x 21700 external battery |
| Battery included in box? | No |
| Charging | USB Type-C, 5V/2A |
| Display | 1.66-inch touch screen |
| Body material | Zinc alloy and leather |
| Cartridge | PnP X DTL or PnP X MTL cartridge |
| Standard cartridge capacity | 5 ml |
| TPD capacity | 2 ml |
| Filling system | Side filling |
| Airflow | Adjustable top airflow |
| Coil platform | VOOPOO PnP X |
| Pod connection | Magnetic connection |
Fully insert the coil into the bottom of the cartridge, paying attention to the alignment markers.
Fill the cartridge with suitable e-liquid and completely close the silicone fill plug.
Wait for at least 5 minutes before use to allow the coil cotton to absorb the e-liquid.
Start vaping at the lower end of the wattage range specified on the coil.
Gradually increase the power in small steps until a balance of flavor and vapor is achieved.
Regularly check the e-liquid level inside the cartridge and do not let the coil run dry.
No. The device operates on a single 18650 or 21700 battery, but the battery is not included in the package contents.
No. The Drag X3 uses the new-generation PnP X coil platform. Older PnP, PnP-VM, and TPP coils cannot be fitted into the PnP X cartridge.
Yes. When using a compatible PnP X MTL cartridge and a suitable resistance PnP X coil, you can switch to MTL vaping. The DTL cartridge included in the box is primarily prepared for high-power DTL and RDL usage.
It is recommended to wait at least 5 minutes after installing a new coil and filling the cartridge for the cotton to saturate completely.
The 100 ml figure is a marketing test result obtained by VOOPOO under controlled laboratory conditions. Actual coil life varies depending on the e-liquid used, wattage value, puff frequency, and usage style.
